The CODE SDA8 DMX distributor is 19 inches standard size rack ready. It re amplifer incoming DMX signal and distribute it onto 8 output without loosing signal strength.

CODE is a professional console and data communication manufacturer and they have put a lot of attention into making each of their product a solid built one. 

It is recommended to put DMX terminators at the end of each DMX chain to avoid signal reflection. 

 

Published in Consoles

Everyone who use uDMX interface should pay credit to [anyma] who is the creator of uDMX and offered it free of charge for private and commercial use. uDMX is open source software and some users also managed to create some extensions for uDMX. Please visit below links for details.

http://www.anyma.ch/2007/research/udmx-12-released/

http://www.anyma.ch/research/udmx/

The uDMX is built around an inexpensive Atmel Atmega8 Microprocessor, using only very few external parts, thanks to the excellent firmware-only USB driver from obdev.at, everything can be crammed into a Neutrik XLR Connector.

It is a low cost and reliable USBDMX interface which opens door to advanced lighting programing and control offered by respected software such as QLC+ (recommended), FreeStyler and DMX Control.

Mac OS driver package download: http://www.ellert.se/PKGS/libusb-2015-10-21/

QLC+ is very straightforward and easy to use. It supports Windows, Linux and Mac OS. We are able to provide you with Fixture Definiations for all our products.

Published in Consoles

The CODE SDA4 DMX distributor is 19 inches standard size rack ready. It re amplifer incoming DMX signal and distribute it onto 4 output without loosing signal strength.

CODE is a professional console and data communication manufacturer and they have put a lot of attention into making each of their product a solid built one. 

It is recommended to put DMX terminators at the end of each DMX chain to avoid signal reflection. 

 

Published in Consoles

We are proud to supply New Hope SDAC Church with lots of gears today. These include:

10X 9X10W RGBW LED Flat PAR in road case

2X 4 Meters Light Truss

5X Wireless DMX transmitter and receivers

1X 240A DMX Controller 192CH

4X 575w Profile Leckos

New Hope SDAC Sydney's Media Master Andrew Hunt visited our warehouse to picked up the equipments. We hope our equipments will perform well in their weekly shows at their church. Thank you for your support.

Published in Company News

Features:

  • Individually controls 12 groups of lights with 16 channels each, or 24 groups of lights with 8 channels each. (each group can contain unlimited number of identical lights).
  • 30 banks of 8 scenes, 240 scenes in total
  • 6 sets of chases containing 240 scenes
  • Two wheels can be assigned to Pan/Tilt channels of every individual moving fixtures
  • Programs can be triggered by music, midi, automatically or manually
  • All Chases can be executed at the same time
  • Top quality plus well written easy to follow manual
  • Come with LED USB light. Australian power adaptor

The controller only respond to MIDI commands on the MIDI channel which it is set to full stop. All MIDI controls is performed using Note on commands. Other Midi instructions are ignored.

You can transfer data between two 240A dmx controllers.


Creating a Scene, and Program:
A scene is a static lighting state. Scenes are stored in banks. This controller has 30 banks, and each bank can store 8 scenes.
A program (also called "bank" or "cue") is a sequence of different scenes that will be called up one after another. 
Steps:
1, Press Program button until the LED blinks
2, Position SPEED and FADE TIME sliders all the way down
3, Select the SCANNERS you wish to include in the scene
4, Compose a look by moving the sliders and wheel.
5, Tap MIDI/REC button to save the scene, then choose a BANK number, and a SCENES number to store the scene to.
6, Repeat steps 3-5 as necessary to create more scenes in order to make a program. 8 scenes can be recorded in a Program
7, To exit program mode, hold the PROGRAM button.


Run a Program
1, Use Bank UP/DOWN buttons to change program banks if necessary
2, Press the AUTO DEL button repeatedly until the AUTO LED turns on
3, Adjust the program speed via the SPEED fader, and the loop rate via the FADE TIME fader. (SPEED is how fast the scenes are called up. FADE TIME  sets the time it takes to fade from one scene to the next scene)

Creat CHASE
Chase is created by using previously created scenes. Chase differs to program in that scenes can be arranged in any order when creating a chase, and a chase can contain upto 240 scenes not just 8. Scenes are also called "steps" here.

1, Press PROGRAM button until the LED blinks
2, Press the CHASE(1-6) button you with to program.
3, Select a scene by Changing BANK, then select SCENE
4, Tap MIDI/REC button to add the selected scene to the current chase
5, repeat steps 2-4 to add more scenes/steps
6, Press and hold PROGRAM button when you finish

Run a Chase

1, Press CHASE button then press the AUTO DEL button
2, Adjust the speed by tapping the TAP DISPLAY button twice at a rate of your choice

Published in Consoles
Sunday, 15 February 2015 12:29

Phantos 384B DMX Controller Console 384CH

384B CH DMX CONTROLLER WITH MIC, USB LIGHT FOR Club LightJockey

384 CH=24 DIFFERENT Fixtures X16CH Each. (If some of your fixtures are the same and they share the same dmx address they are treated as ONE fixture, taking up only 16 of the 384CH available).

30BANKS*8SCENE=240SCENES,
16 SLIDERS, 6CHASE OF 240 SCENES EACH


PLEASE NOTE THE UNIT HAS A MIDI INTERFACE BUT THE MIDI MODULE IS NOT INSTALLED, AND IT DOES NOT SUPPORT MIDI.

Published in Consoles

Related Products